SILVERON • Hydrogeological Engineering Firm
PAN-INDIA FIELD DEPLOYMENT • EST. 2004

Turnkey Rainwater Harvesting & Engineering Services

Silveron delivers comprehensive geotechnical investigations, proprietary deep aquifer recharge shafts, civil stormwater runoff modeling, and complete Central Ground Water Authority (CGWA) NOC compliance DPRs for India’s leading manufacturing campuses, infrastructure projects, and agro-industrial facilities.

Core Engineering Capabilities

Pillars 01 – 06

PILLAR 01
Geophysical Subsurface Investigation

Ground Surveys & Soil Strata Testing (VES)

Accurate subsurface intelligence is the foundational prerequisite for any high-capacity recharge system. We deploy Vertical Electrical Sounding (VES) and resistivity array mapping across the campus to determine exact soil layer profiles, locate underlying permeable sand strata, and calculate local hydraulic infiltration capacities before drilling begins.

Strata Delineation
Identifies clay barriers, hardpan, and fractured rock layers down to 50+ meters.
Aquifer Identification
Pinpoints high-permeability sand and gravel beds capable of rapid absorption.
Defensible Field Data
Provides empirical resistivity curves included in statutory CGWA DPR filings.

PILLAR 02
Civil Hydrology & Flood Mitigation

Stormwater Drainage Planning & Hydraulic Modeling

Heavy cloudburst events can submerge industrial roadways, factory basements, and logistics yards in minutes. We model campus-wide runoff coefficients, size collection channels to withstand 50-year return storms, and integrate gravity-fed desilting chambers to eliminate standing water while channeling clean runoff directly to recharge conduits.

Runoff Velocity Modeling
Calculates peak discharge volumes from roof catchments and paved yard surfaces.
Dual-Stage Desilting
Engineered settlement basins and silt traps that stop heavy sediment before intake.
Foundation Protection
Protects heavy equipment pads and structural footings from water saturation.

PILLAR 03
Proprietary Infiltration Technology

Turnkey Recharge Shaft Construction

Developed and perfected over 20 years of field engineering by Sunil Sharma, the Silveron Recharge Shaft pierces through dense, impermeable surface clay into deep, free-draining sandy aquifers. With no slotted casing pipes to choke on silt, the shaft operates continuously during peak cloudbursts without maintenance failure.

Multi-Strata Contact
Unlined graded filter media maintains direct percolation contact with natural soil.
High Intake Velocity
Engineered to absorb 15,000 to 25,000 liters of rainwater per hour per conduit.
Turnkey Construction
Self-executed on-site boring, graded gravel packing, and civil connections.

PILLAR 04
Hydrogeological Validation

Water Table Monitoring & Impact Audits

We believe engineering must be substantiated by empirical data. Silveron conducts pre- and post-monsoon hydrogeological audits, measuring static water levels in observation piezometers, verifying local water table rebound, and providing plant directors with boardroom-ready sustainability metrics for ESG disclosure.

Piezometric Logging
Continuous or seasonal tracking of underground aquifer water table levels.
Infiltration Verification
Darcy-compliant intake rate measurements across multiple monsoon cycles.
ESG & Audit Reports
Defensible documentation for corporate environmental responsibility audits.

PILLAR 05
Infrastructure Retrofit & Recovery

Revival of Choked Pits & Dry Wells

Across India, thousands of conventional rainwater harvesting pits fail within 2 to 3 monsoons because slotted PVC pipes clog with fine silt. Rather than abandoning these assets, our crews perform deep desilting, high-pressure reverse flushing, and structural retrofits to restore defunct pits and dried-up borewells into high-capacity recharge conduits.

Slotted Pipe Extraction
Removal of clogged pipe mesh and replacement with graded media matrices.
Borewell Transformation
Adapts existing dry tube wells into rapid groundwater recharge injection points.
Annual Pre-Monsoon Flush
Built-in maintenance setup enabling 15-minute sediment backwash cycles.

PILLAR 06
Statutory Regulatory Compliance

CGWA NOC Compliance & Detailed Project Reports (DPR)

Obtaining groundwater abstraction clearance from the Central Ground Water Authority (CGWA) requires rigorous hydrogeological justification. Silveron prepares comprehensive Detailed Project Reports (DPR), including water balance calculations, VES strata plots, and impact assessments, ensuring 100% first-pass NOC issuance and timely renewal.

Statutory DPR Preparation
Compliant with latest CGWA guidelines, state groundwater authorities, and SPCB norms.
Water Balance Modeling
Precise quantification of annual campus abstraction versus artificial recharge replenishment.
100% Clearance Record
Proven approval track record across critical and over-exploited assessment units.

Our Project Methodology

Phase 1 – 4

PHASE 01

Hydrogeological Reconnaissance

On-site topographical survey, rainfall data evaluation, campus stormwater assessment, and Vertical Electrical Sounding (VES) resistivity testing.

PHASE 02

Hydraulic Modeling & DPR

Catchment runoff calculations, desilting chamber hydraulic sizing, recharge shaft location mapping, and complete statutory CGWA compliance report preparation.

PHASE 03

Turnkey Field Construction

Specialized mechanical drilling, casing through surface clay, installation of graded unlined filter matrices, and civil integration with storm drains.

PHASE 04

Monitoring & Maintenance

Static water level logging, multi-monsoon infiltration audits, reverse backwash maintenance support, and CGWA NOC compliance audit renewals.

Need an Engineering Consultation for Your Industrial Campus?

Speak directly with our senior hydrogeologists regarding site strata feasibility, CGWA NOC clearance requirements, or solving persistent campus monsoon waterlogging.


Scroll to Top